How To Deal With Nozzle Suction Loss Of A Shark Navigator Professional?

Understanding and applying a variety of delicate specifications and definitions of the best vacuum cleaner is one of the most challenging aspects of selecting a new one. Almost a hundred per cent of users all want vacuum cleaners that offer the best cleaning ability and they are very demanding in cleaning ability with “power” or “suction”.

But that is not the whole picture because cleaning ability is not just about power and suction, even though these attributes are fundamental factors when we mention a performance of a qualified vacuum. With a little information and education, you will be able to look through the figures and understand more easily and decide which is the best vacuum cleaner or which are the figures that you need to focus on while choosing a new one.

Know what to buy

However, even if we know what to choose and what to buy, we still have to concern about the complex level of the problems that we may have to face in the future with the best vacuum cleaner. It means that one of the most difficult parts is to fix or to repair it at home without the help and the support of an expert or at least the officer of the vac that you choose. In this article, we will help you to fix the predicament of the suction of a Shark navigator professional at first when you are not able to reach for outside assistance.

best vacuum reviewSunction control

Clog in the hose

First, you need to squeeze the two tabs at the bottom of the nozzle on the back and stop the hose. In the L-shaped plastic base, please make sure that you will have cleared all debris and there is not anything stuck that could cause the hose to prevent the suction from working. The next part is to check the hose itself. Feel along-side the hose to check for a blockage and if so, use a tool to take the blockage out. In case there is no blockage in the hose, change in to check the suction release valve at the handle of the hose.

Another place to take a look at are clogs is in the hose that relates to the base of your best vacuum cleaner. Let the vac stay down to the floor and check if there are any blockages. The side of the hose that attaches to the main body of the vacuum also need you have it attached; make sure there is nothing blocking this working process. Another place to make sure that you need to clean inside the tube on the main body of the vacuum. Turn the red button to free the tube from the main body of the vac then check for clogs in the tube once again.

Motor is broken

If you find nothing trouble with the hoses, unclip the back hose of the vacuum. If you cannot feel air being sucked into this part of the equipment, have a look at the filter. Press the grey tab to free the dirt bin that connect it to the main body of the vac. At the base of where the bin sits is the filter component, all you need to do is let your hand touch in this component and turn on the vacuum. If you can feel air, but not in the hose attachment in the rear of the vacuum body, the problem stays in the cyclone. However, if you do not, there is most likely a problem with the motor or fan and you will have to contact Shark Customer Service Center.

best vacuum cleaner

No loss of suction

Cyclone Assembly

If you can feel air coming from the filter but not the hose base, please press the grey tab of the bin and release it and also the latched cover. Pull the component in the top of the bin out, then open the component over the trash or outdoors and tap the top, where the tiny dirt particles will collect in the filter at the base. Then you would have the filter empty and clean.

Finally, understanding to choose the best vacuum cleaner is a challenge which maybe hard to overcome. But through this article, we hope to help you identify some of the factors you need to consider when getting a new vacuum. One last thing, some tips above would help you so much while facing problems with your Shark.

Leave a Comment